Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Aprilaire Coil Cleaning: The Atlanta Owner’s Guide
Aprilaire coil cleaning in Atlanta typically runs between $185 and $420 depending on how accessible your evaporator coil is and how badly it’s fouled. We stock Aprilaire-compatible coil cleaning equipment and can usually get your system back to full airflow within one visit. Most Atlanta homeowners discover they need this service the hard way: the AC runs constantly but the house won’t cool below 78, or there’s a faint musty smell coming through the vents that gets worse when the system kicks on.
The Aprilaire name is on a lot of Atlanta HVAC systems because their whole-home humidifiers and air purifiers are solid equipment. But the coil, which is the part that actually gets cold and dehumidifies your air, isn’t always Aprilaire branded. That’s the first thing to understand. The coil is made by the equipment manufacturer, and the Aprilaire component is usually the filtration or humidification side. What matters is that whoever cleans it knows both systems and how they interact. That’s where we come in.
We’re an independent Atlanta service provider, not affiliated with Aprilaire. We work on Aprilaire-equipped systems every week, and we also stock parts for Lennox, Trane, and Carrier equipment when a component needs more than cleaning.
Which Aprilaire Models This Applies To
This applies to any Atlanta home with an Aprilaire whole-home system paired with a central AC. The most common configurations we see are Aprilaire 5000 electronic air cleaners, Aprilaire 500 and 600 series humidifiers, and Aprilaire 2200 and 4200 media filters, all working alongside a standard A-coil or slab evaporator coil. The coil itself is usually a Carrier, Trane, or Lennox unit. The Aprilaire equipment sits upstream of the coil, and when that equipment isn’t maintained properly, the coil downstream pays the price.
Here’s the compatibility gotcha most people miss: if your Aprilaire filter has been running past its service life, or if the humidifier pad has mineral-crusted over, the fine particulate that slips through lands directly on your evaporator coil. Once that coil gets a layer of grime, the whole system loses efficiency. It’s not an Aprilaire failure by itself. It’s an Aprilaire maintenance item that cascades into a coil problem.
When we arrive, we confirm the coil dimensions and orientation before quoting. An A-coil in an upflow configuration in a Decatur ranch house is a different job than a horizontal slab coil in a Buckhead condo. That’s why our quoted range has spread. We don’t give a phone quote and then revise it at the door. Dale Whitmore’s rule is simple: look at the coil first, price it once, put it in writing.
Styles & brands we work with




Signs Your Aprilaire Coil Cleaning Is Failing
- Reduced airflow from every register. A fouled coil restricts air movement across the entire system, not just one room. If every vent feels weak, the coil is the first place we look.
- Longer run times with no temperature change. Dirt acts as an insulator on the coil fins, so the refrigerant can’t pull heat out of the air efficiently. Your system runs longer and delivers less cooling. Georgia’s long cooling season makes this worse faster than in most of the country.
- Ice forming on the refrigerant line or coil housing. Restricted airflow causes the coil temperature to drop below freezing. If you see frost on the larger, insulated line at the outside unit, shut the system down and call us. Running it frozen can damage the compressor.
- A damp or musty smell when the blower runs. The coil produces condensation constantly during Atlanta summers. When dirt and biological growth build up on the coil surface, that moisture picks up the smell and carries it through the ductwork.
- Dust accumulating on supply registers quickly after cleaning. If your ducts were cleaned two months ago and the registers already show grey film, the coil is trapping and releasing particulate. The Aprilaire filter catches some of it. The coil catches the rest, then lets it go when condensation washes over it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Atlanta homeowners, expect to pay between $185 and $420 for a professional evaporator coil cleaning. The spread depends on access, coil type, and how aggressively the coil has crusted. A routine cleaning on an easily accessible A-coil sits at the lower end. A slab coil buried in a tight closet with years of buildup, or one that needs coil combing to straighten bent fins, lands at the higher end.
Here’s what’s included, line by line, so there are no surprises:
- Full system inspection: $0 when part of a cleaning visit. We check the coil, drain pan, drain line, and the Aprilaire equipment upstream before touching anything.
- Coil cleaning, standard access: $185 – $275. Includes coil-safe foaming cleaner, rinse, and drain line flush to confirm water moves freely.
- Coil cleaning, difficult access or heavy buildup: $275 – $420. When we have to remove panels, work in a crawlspace, or spend extra time on heavy biological growth or fin repair.
You get the written price before we start. Not after we’ve removed the access panel and discovered something. Before. And every coil cleaning carries our 365-Day Done Right Promise in writing. If the coil fouls again within the guarantee period, or if we missed something in the drain line, we return and make it right at no charge. That’s the Kingswell Guarantee. It has been the same since 2004: say the price, show up in the window, leave the place cleaner, put the guarantee in writing, and come back if it fails.
DIY or Call Us?
Some things a homeowner can safely handle. Changing your Aprilaire filter is one of them. Pouring a cup of vinegar down the condensate drain line a few times a year is another. But coil cleaning is a different category. The coil sits inside the air handler, behind panels, often above the blower motor or in a tight attic. Getting cleaner into the coils without flooding the electrical components takes practice. Getting the rinse water to go where it should means understanding the drain pan slope and the overflow switch. And here’s the part nobody thinks about: coil cleaning chemicals are caustic. They’ll eat the paint off the side of your furnace if they drip, and they’ll burn your eyes if you’re working underneath a coil in a crawlspace.
Working around a live evaporator coil and the electrical inside an air handler is not a place for a first-timer. We’d rather walk you through the filter change on the phone than hear you tried to pull the A-coil apart with a YouTube video playing. If the coil is visibly dirty or the symptoms above match what you’re seeing, call us at (470) 378-1006. One visit, one written price, done right. Clean ducts, plain talk, everything in writing.
FAQs
In Atlanta’s climate, an evaporator coil typically lasts 10 to 15 years before it needs replacement, but only if it’s been cleaned regularly. The combination of high humidity and long cooling seasons means coils here work harder and grow biological matter faster than in drier climates. A coil that’s never cleaned can fail in as little as 6 to 8 years, usually from pinhole leaks in the copper caused by corrosion trapped under a wet layer of grime. The fastest way to shorten a coil’s life is to skip the Aprilaire filter changes and let the coil pay for it.
A dirty coil can almost always be cleaned rather than replaced, as long as the coil hasn’t developed a refrigerant leak. Cleaning removes the dirt and biological growth that restrict airflow and insulate the fins. If the coil is leaking refrigerant, cleaning won’t help and you’re looking at replacement. But the strong pattern we see in Atlanta is coils being condemned as “bad” when they’re actually just filthy. Before you approve a replacement quote from anyone, ask whether the coil was cleaned first. Call us at (470) 378-1006 and we’ll tell you what you actually have.
Most Aprilaire-equipped coil cleanings in Atlanta take between 90 minutes and 3 hours from arrival to a written report. Straightforward access on a routine cleaning lands at the shorter end. Tight crawlspaces, heavy buildup, or a clogged drain line that needs flushing adds time. We don’t rush it, because the rinse cycle matters as much as the cleaning cycle. Whatever the time, you’ll have the price in writing before the work starts, so you know what the clock is costing you.
We carry the common Aprilaire maintenance items on our trucks: media filters, humidifier pads, and drain line fittings. For coil work specifically, we carry coil-safe cleaning agents, fin combs, and drain line tools on every visit. If we find a failed Aprilaire component during the inspection, we can usually source it same-day in Atlanta and return to install it. We also stock parts for Lennox, Trane, and Carrier systems when the coil work turns up a component issue.
Written by Dale Whitmore, Owner, Kestrel Air Duct Atlanta at Kestrel Air Duct Atlanta, serving Atlanta and nearby areas.