Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Duct Cleaning Across Conley
Air duct cleaning in Conley typically runs between $450 and $950 for a full system, with most single-family ranch homes landing in the $550 to $750 range. We’re the team Conley homeowners call when they want a written price before work starts and a crew that actually shows up on time. Our Air Duct Cleaning technicians know the housing stock here: brick ranches from the 1950s through the 1970s, original galvanized ductwork, floor-mounted returns, and the specific problems that come with all three. If you’re off Cedar Grove Road, near the rail yards, or in one of the quieter streets east of Moreland Avenue, we can usually get a crew to you within a day or two of your call. For a free estimate, call (470) 378-1006 and you’ll get a real person on the line, any hour.
Why Kestrel Air Duct Atlanta Is Conley’s Preferred Air Duct Cleaning Company
We earned trust in Conley the hard way: by showing up when we said we would and standing behind the work in writing. Dale Whitmore, who leads our team, built the Kingswell Guarantee into every job from 2004 onward. That means a written price before a single vent is touched, a defined arrival window, a clean job site when we leave, and a 365-Day Done Right Promise that says if the work falls short, we come back and fix it at no charge.
Conley homeowners have told us the same stories again and again: a low quote that doubled at the door, a crew that never showed, a dryer vent that clogged six weeks after it was “cleaned.” Our technicians are background-checked and uniformed, and they use Rotobrush rotary brush systems, Nikro negative-pressure units, and Abatement Technologies HEPA filtration. Those are real tools, not a box-store shop vac. When we clean ducts in Conley, we clean the entire system – supply, return, and trunk lines – and we document what we find.
Styles & brands we work with




Air Duct Repair in Conley
Air Duct Repair in Conley often means one thing more than any other: finding and fixing crushed or disconnected runs under a slab foundation. In the ranch homes that dominate this area, the original galvanized ductwork was laid under the concrete when the house was built. Six decades later, that metal can be collapsed, rusted through, or pulled apart at the seams. Homeowners notice rooms that never cool in July, a blower motor that sounds strained, or dust that returns days after a cleaning.
A duct repair on a single crushed run in Conley generally runs between $180 and $420, depending on access and how much of the run needs replacing. Full sealing of a leaking trunk line runs higher, typically $600 to $1,200. We always camera-inspect before quoting, so the price you get is based on what we actually saw, not a guess.
Crushed Runs Under Conley Slabs
This is the repair we do most often in Conley. Original 1950s and 60s ductwork was not designed to hold up forever under shifting clay soil. We open a small access point, run a camera through the line, and find the collapse. Then we seal or replace the section and verify airflow with a static pressure reading before we leave.
Disconnected and Leaking Duct Joints
Older duct systems in Conley were often assembled with tape that has long since dried out and failed. The result is conditioned air leaking into crawl spaces, attics, and wall cavities while rooms stay hot or cold. We reseal joints with mastic and mechanical fasteners, which is a permanent fix, not a patch.
Ductwork Cleaning in Conley
Ductwork Cleaning in Conley is different from what many homeowners expect. The ducts in these 1950s-to-1970s homes have been collecting dust, construction debris, pet hair, and pollen for forty to seventy years. A typical clean on an original-system ranch runs between $550 and $800. That includes the supply side, the return side, the main trunk lines, and a sanitizing step to address the mold and mildew that Conley’s humidity encourages.
If a home has never had the ducts cleaned, the first visit usually takes four to six hours. We use negative-air extraction – think of it as a powerful vacuum pulling air backward through the system while brushes agitate the duct walls – to lift out what has settled over decades. The Abatement Technologies HEPA filtration keeps that loosened material out of your living space during the work.
Floor Return Systems
Conley ranch homes often have return air ducts set into the floor, not the wall. These pull in dust, pet hair, and fine debris directly off the slab and the floor surface. That debris feeds the system constantly, so a supply-only clean never fixes the problem. We deep-clean the return side on every Conley job as standard practice.
Mold and Humidity in Metal Ducts
Uninsulated metal ducts in Conley sweat during the humid months. That moisture, combined with the organic material already inside the ducts, creates the conditions for mold. We remove the growth mechanically and apply an EPA-registered sanitizer, which is the step most companies skip. That skip is why a “clean” system here can smell musty again within a month.
Trusted Brands We Service in Conley
We work on systems built around all major brands, and we’re equipped to handle the older metal ductwork common in Conley homes. Our techs use Nikro negative-pressure machines that pull 5,000 cubic feet per minute through the system, which is what makes a deep clean possible. For homeowners who want to maintain cleaner air between service visits, we stock Honeywell and Aprilaire filtration products that fit standard residential systems. No adapters, no waiting on a special order. We keep the common filters and replacement grilles on the truck, so most Conley jobs are finished in a single visit.
See the difference
Before
After
Before
After
Before
AfterCommon Air Duct Cleaning Problems We See in Conley Homes
- Floor returns pulling debris off the slab. In Conley’s ranch homes, return air inlets are often set into the floor, which means pet hair, dust, and fine grit get drawn directly into the return ducts. A cleaning that doesn’t address the return side will never hold up.
- Crushed or collapsed galvanized runs under the foundation. Shifting soil and decades of moisture take a toll on original metal ductwork. We find crushed sections on a large share of homes built before 1980 in Conley.
- Humidity-driven mold in uninsulated metal ducts. Conley’s hot, muggy summers cause sweating inside ducts that have no insulation wrap. That feeds mold growth, especially in homes where the original ductwork was never updated.
- Pine pollen packing the return plenum each spring. The pine and hardwood trees around Conley produce heavy pollen from March through May. It collects in the return plenum and reduces airflow before homeowners even notice the system straining.
Pricing for Air Duct Cleaning in Conley, GA
Most single-family homes in Conley run between $450 and $950 for a complete air duct cleaning, with the average sitting right around $650. A straightforward ranch with one air handler and original metal ducts usually lands between $550 and $750. Larger homes, systems with flex duct that has sagged, or homes that have never been cleaned may push toward the top of that range. Repairs are quoted separately after camera inspection. We give every Conley homeowner a written price before any work begins, and that number does not change at the door. Call (470) 378-1006 for a free estimate.
We Also Serve Cities Near Conley
Our crews work throughout the south metro area, including Stockbridge, Decatur, Atlanta, and Smyrna. If you’re just outside Conley, give us a call and we’ll confirm coverage for your street. Every job carries the same Kingswell Guarantee – written price, arrival window, clean site, and the 365-Day Done Right Promise – no matter which Conley area home we’re working in.
Serving Conley, GA - Our Local Coverage Area
We’re based in the Conley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Conley
Yes. Floor-mounted returns in Conley homes pull debris directly off the slab, so we remove the return grilles, vacuum the return boots by hand, and run the brush system through the full return trunk line on every job. A supply-only cleaning leaves the return side loaded with the same material that caused the problem, which is why we treat the return side as mandatory, not optional.
We run a video camera through the main supply and return trunks before we give a price. That inspection shows whether a run is crushed, disconnected, or packed with debris, which tells us what a cleaning will and will not fix. If the camera finds a crushed section, the cleaning quote is separate from the repair quote, and both are in writing before you decide anything. Call (470) 378-1006 to schedule an inspection.
The most common cause in Conley is uninsulated metal ductwork sweating during the humid months. When warm, moist air contacts the cool metal surface inside a duct, condensation forms, and that moisture feeds mold. Even a newer air handler connected to older or uninsulated ducts will have the same problem. We address it with mechanical removal and an EPA-registered sanitizer, and we can insulate the worst sections to keep it from returning.
It is most often a return-side cleaning issue. In Conley ranches with floor returns, the return duct pulls in moisture, dust, and organic material that collects in the return plenum and the return drop. That material gets damp in the summer and smells musty every time the system runs. We inspect the return side during a cleaning and treat the plenum and the return trunk, which usually resolves the smell. If your air handler itself is the source, we’ll tell you that plainly after inspection.
Yes, and this is where the equipment matters. Our Rotobrush agitation system uses soft nylon bristles that clean the duct wall without cutting or scraping the metal. The Nikro negative-pressure unit pulls debris out from downstream, so we are not forcing material through weak joints. Original galvanized ducts from the 1960s are generally sturdy enough for this process, and we inspect the full run before we start so we know where the weak spots are.
Written by Dale Whitmore, Owner at Kestrel Air Duct Atlanta, serving Conley since 2004.