Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Atlanta, GA | Kestrel Air Duct Atlanta
We’re an independent Trane service provider offering Air Duct Cleaning - Atlanta across the metro area, and our pricing runs between $450 and $900 for most homes depending on system size, with a written quote in your hands before any work starts. The one thing that sets our Trane work apart here is what Atlanta’s humidity does to these systems: we routinely open air handlers in Buckhead and Sandy Springs and find condensation-soaked duct insulation that a generic cleaning company would never touch. Call (470) 378-1006 for a free estimate, and you’ll talk to a live person who can answer Trane-specific questions on the spot.
Why Atlanta Residents Choose Us for Trane Service
Dale Whitmore, our owner, picked up his HVAC fundamentals at Los Angeles Trade-Technical College and has spent the better part of two decades doing duct work across the Southeast. He and our crew have serviced Atlanta homes for years, from older ranch houses in Decatur to newer builds near Ponce City Market. That matters when you own a Trane, because Trane’s high-efficiency air handlers and variable-speed heat pumps move air differently than builder-grade units, and your ductwork either supports that design or fights it.
We’re not a franchise operation with a rotating cast of subcontractors. Our technicians are background-checked, uniformed, and trained on Trane’s specific airflow characteristics. We carry Rotobrush rotary brush systems, Nikro negative-pressure units, and Abatement Technologies HEPA filtration, all of which matter on Trane systems where the margin for sloppy work is thinner. When we finish an Atlanta job, you get a written checklist of what we found and what we did, signed by the technician.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Solve in Atlanta
- Condensation and mold on attic duct runs in Buckhead and Sandy Springs. Many Trane systems in 1980s and 1990s homes have attic ductwork that sweats from the inside during Atlanta’s July and August heat. We remove the mold, seal the ducts, and reinsulate where needed so the problem doesn’t return next summer.
- Pollen-clogged evaporator coils during Atlanta’s March-to-May bloom. Atlanta’s pine pollen season is aggressive, and Trane evaporator coils are dense. When coils clog, the system runs longer, pulls more humid air through the ducts, and leaves dust and allergens circulating. We clean the coil and the full duct run in the same visit.
- Flexible duct kinks and disconnections at Trane plenum connections. In newer suburban Atlanta homes with flex duct, we frequently find kinked or pulled-apart runs where airflow drops sharply. We repair or replace the section, using sealed connectors rather than tape that fails in attic heat.
- Mold and biofilm inside Trane Hyperion air handler drain pans. Atlanta’s high dew points mean condensate sits in drain pans longer. In Trane Hyperion units, that pan can develop biofilm that smells and feeds mold. We clean the pan, the drain line, and the surrounding cabinet.
- Poorly insulated return ducts pulling hot attic air. Return ducts in Atlanta attics can hit 130 degrees in August. If they’re uninsulated or leaky, your Trane is cooling air that’s already been heated. We seal and insulate return runs so the system works less and cools more.
Trane Service in Atlanta: What Local Conditions Mean for Your Equipment
Atlanta’s humid subtropical climate is the single biggest factor in how Trane ductwork performs here. The city’s long, hot summers and high dew points create condensation inside duct systems that wouldn’t sweat in Charlotte or Nashville, where summer humidity runs measurably lower. We opened a Trane XR14 system in a 1990s Buckhead home off West Paces Ferry Road and found the supply ducts in the attic so poorly insulated that condensation dripped onto the ceiling below. We sealed and reinsulated the main trunk line, cleaned mold from the supply boots, and restored even airflow to all rooms. If you own a Trane in Atlanta and your upstairs has that damp, musty smell every summer, the problem is almost certainly attic ductwork sweating from the inside, and that’s a fixable problem, not a mystery.
Trane Models & Products We Service in Atlanta
We work on every Trane line found in Atlanta homes. That includes XR14 and XB13 series units common in builder-grade and mid-range suburban houses, XV18 and XV20i variable-speed heat pumps in upscale Buckhead and Sandy Springs homes, Hyperion air handlers used in many 1980s through 2000s tract homes, and RunTru by Trane entry-level systems in older intown bungalows and rentals. When a repair calls for parts, we use OEM Trane components when the job requires them, but we’ll also recommend quality aftermarket alternatives, like sealed flex duct connectors or antimicrobial coil treatments, when they perform better or cost less. Our Trane sales & service team can walk you through what your system needs.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Atlanta
Most Atlanta homes pay between $450 and $900 for a full Trane duct cleaning, depending on system size, the number of returns, and how much mold or debris we find. A straightforward single-system clean in a 1,500-square-foot ranch runs lower; a two-story Buckhead home with attic and basement duct runs and heavy mold remediation runs higher. What drives the price up is access, contamination, and whether we’re also sealing or reinsulating sections. Our estimate is free, and the written price you get before we start is the price you pay. No door-step revisions. For an exact number on your Trane system, call (470) 378-1006.
Serving Atlanta, GA - Our Local Coverage Area
We’re based in the Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Atlanta
That smell is almost always mold or mildew growing on your evaporator coil, in your drain pan, or inside your ductwork. In Atlanta, the humid spring air feeds this growth, and when the system kicks on after a period of inactivity, it blows that odor through the house. The fix is a full cleaning of the coil, drain pan, and duct interior, not just an air freshener. Call (470) 378-1006 and we’ll find the exact source.
Yes. Atlanta’s pine pollen is heavy and fine, and it penetrates duct systems through leaks and poorly sealed returns. Homes near large pine stands, common throughout the northern suburbs, accumulate pollen in duct liners and on coils faster than homes in open areas. A cleaning every two to three years may be more appropriate for these homes than the five-year interval often quoted nationally.
In many cases, yes. If the flex duct is kinked at a connector or has pulled loose at a plenum, we can cut out the damaged section, install a sealed connector, and restore full airflow without replacing the entire run. If the duct has collapsed along its length or the inner liner has torn, a section replacement is the honest fix, and we’ll show you photos before and after so you can see exactly what we did.
This is one of the most common complaints we hear in Atlanta, and it’s usually a duct problem, not a Trane problem. The upstairs supply runs are often in the hottest part of the attic, undersized, or kinked, so they deliver less cooled air. Adding insulation, sealing leaks, and sometimes balancing damper positions solves most of these upstairs-hot-downstairs-cold cases. We find this routinely in two-story Atlanta homes with attic-mounted air handlers.
It can, but results vary. If your ducts are coated with dust and pollen, or your coil is clogged, the system runs longer and works harder to hit the thermostat, which shows up as higher summer bills. Cleaning removes that resistance. The bigger savings come when we also seal leaks in the duct runs and combine it with our Dryer Vent Cleaning in Atlanta, because Atlanta attics are hot enough that leaking cool air into them is expensive. Call (470) 378-1006 for a free estimate and we’ll tell you honestly what you can expect.
Service Areas Near Atlanta
We serve Atlanta proper and the surrounding metro. You’ll find us working regularly in Atlanta service area neighborhoods, as well as Decatur, Smyrna, Stockbridge, Doraville, and East Point. If you’re in Trane service in Decatur or Trane service in Smyrna, we handle both.
Book Your Trane Service in Atlanta Today
Call (470) 378-1006 and you’ll reach a person who knows Trane systems and Atlanta’s climate. We’ll schedule a time that works, give you a written price before we start, and stand behind the work for 365 days. Clean ducts, plain talk, everything in writing.
Written by Dale Whitmore, Owner at Kestrel Air Duct Atlanta, serving Atlanta since 2004.